Cabinet Planner
General >> Cabinet Planner >> Not Able To
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1287622039
Not Able To
Post by Pete on Oct 20th, 2010, 6:47pm

I can not get the walls to fit ... I just updated as well.

Typically wall one is there and click the box to start from previous. The second wall is off the page and I cant change the location of wall 1 to get it on the page. In the past the walls automatically became smaller and fit the screen.

Thanks
Re: Not Able To
Post by Rob on Oct 21st, 2010, 08:44am

What are the wall sizes, angles and locations?

Also, what do you have your screen size set to? And your DPI setting?
Re: Not Able To
Post by Pete on Oct 21st, 2010, 6:05pm

I started with a 74" at the bottom of the screen right to left and then left side of screen bottom to top 167 1/4"

Haven't changed anything or I should say manually with my pc and it has never happened before. The walls would "zoom out"

Res 1440x900
DPI program?

Re: Not Able To
Post by Rob on Oct 21st, 2010, 6:23pm

Only walls that extend off the screen on the right or bottom will trigger the program to rescale the drawing. If it is off the screen to the top it will ask you to increase the Y value of the wall.

Did you try entering something like 175 for the Y values of wall 1?


the DPI setting is also called the Font setting. On Vista, right click an empty area of your desktop and select Customize (or similar). In the window that opens, you can find the DPI setting link along the left side of the window.
Re: Not Able To
Post by Pete on Oct 21st, 2010, 6:46pm

Rob I got it
thanks I increased y on wall one and it rescaled everything
tHANKS

bACK TO WORK
Re: Not Able To
Post by ruthless1 on Nov 3rd, 2010, 2:06pm

ok rob im brand new with CP, im still in the figuring out stage but wth is up with the pop up that says "can only run 1 cp at a time "when i try and look at it in 3d , also ive done this 1 elavation 6 dif times and 1 time the sides splashes will not be on there , the next 1 will be up there huhhuhhuh and can you alter the position of the cab if in the wrong place without deleting it , like i said im learning but the more help the better