Cabinet Planner
General >> Cabinet Planner >> Correction on cut list for side panels
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1311803136

---

Correction on cut list for side panels
Post by revrandyf on Jul 27^th, 2011, 3:45pm

I am using Tall custom to create some bookcases. I have a case that is 12 1/4" inches deep including face frame. The back is 1/2" and rabbeted into the side. The side panels should be 11 1/2" but they are showing 11". I've checked everything in the standards that I can find. Any help?

---

Re: Correction on cut list for side panels
Post by Rob on Jul 27^th, 2011, 8:00pm

You'll need to set the "inset back depth" to 1/2 in the general standards.

You can press the "save and apply to current job" button to apply this to all cabinets in the job.

Or, delete the cabinet, change the setting, recreate the cabinet, and then change the setting back if you want it to only apply to the one cabinet.

---