Cabinet Planner
General >> Projects >> here is 1 I just finished
http://cabplanner.conforums.com/index.cgi?board=projects&action=display&num=1257255772
here is 1 I just finished
Post by bowdoctor on Nov 3rd, 2009, 06:42am

User Image

User Image

the new upgrade is the ticket
thanks
tim
Re: here is 1 I just finished
Post by taylorcabinet on Nov 3rd, 2009, 5:33pm

That's really nice. Wouldn't it be great to be able to add beadboard in drawing?
Re: here is 1 I just finished
Post by bowdoctor on Nov 3rd, 2009, 5:37pm

thanks and yeah that would be cool
Re: here is 1 I just finished
Post by C2 on Nov 5th, 2009, 8:20pm

Just a quick question...how did you do the toe kick?
Re: here is 1 I just finished
Post by bowdoctor on Nov 6th, 2009, 08:22am

4" toe kick
cut out is 2 1/2" x 4"
then i use 4"x 3/4" toe kick
I left the center box under the cabinet open so the box is the floor vent
then used a drop in floor vent and drilled a screw hole in each end
cut the toe kick so the vent sets in it and put a pocket screw in each end to hold it
Re: here is 1 I just finished
Post by C2 on Nov 6th, 2009, 8:21pm

So it was one continuous toe kick out of 3/4"?

The reason I ask is because I am used to having a 3/4" toe for each cabinet then covering all the toes in a run of cabinets with a 1/4" toe kick skin.

Yours looked really good so I thought I would find out how it was done. Thanks for the reply.
Re: here is 1 I just finished
Post by bowdoctor on Nov 7th, 2009, 06:46am

I do use a toe on each box only it is inside the sides like the bottom and streachers I just left out the toekick backer on the center box for the air flow
then I use 3/4 to skin the front 1 piece
that allows me to 45 the out side corners
I like to return ends also its a much cleaner look
3/4 is a great selling point
Re: here is 1 I just finished
Post by mike on Nov 7th, 2009, 07:47am

you could have not made your toekick strecher as tall just 4 inches and let the air flow come over the top of the strecher and not cut a vent in the front a lot cleaner look still a fine set of cabs.
Re: here is 1 I just finished
Post by bowdoctor on Nov 8th, 2009, 06:19am

maybe but then they could not shut off that room when needed
we had to have a vent for this 1
I normaly wood rout through the toe and make it a vent
I dont like to see a joint eather so the joint is covered with the vent