Cabinet Planner
General >> Cabinet construction >> Upper Corner Cabinet
http://cabplanner.conforums.com/index.cgi?board=construction&action=display&num=1345521617

---

Upper Corner Cabinet
Post by tbelk34 on Aug 20^th, 2012, 10:00pm

I'm building my first corner cabinet using this software. It has 24" left & right back width, 12" left & right side depth, 1/4" insert back depth. To determine my 45 angle, do I cut a 22.5 angle on the 12" sides and a 22.5 angle on the 17" wide face frame? It doesn't seem to want to work out.

---

Re: Upper Corner Cabinet
Post by Rob on Aug 21^st, 2012, 10:57am

This may (or may not) help. http://www.cabinetplanner.com/upper_corner_cabinet.html
Yes, generally the sides and face frame are figured for a 22.5 angle.

Which part sizes don't appear to be correct for your construction method?

---

Re: Upper Corner Cabinet
Post by tbelk34 on Aug 21^st, 2012, 12:29pm

After reviewing the attached drawing you sent I thank the problem is the size of the top & bottom. The work sheet shows the size as 23 3/8 x 23 3/8.

---

Re: Upper Corner Cabinet
Post by tbelk34 on Aug 21^st, 2012, 2:11pm

Rob,

Thanks for your help.

All the numbers are correct. I forgot to figure in the 3/8 dado on the side panels.

Thanks again

---