Welcome Guest. Please Login or Register. Mar 30th, 2018, 8:57pm
ATTENTION MEMBERS: Conforums will be closing it doors and discontinuing its service on April 15, 2018. We apologize Conforums does not have any export functions to migrate data. Ad-Free has been deactivated. Outstanding Ad-Free credits will be reimbursed to respective payment methods.
Re: Making the boxes
« Reply #2 on: Aug 22nd, 2014, 11:20am »
After looking carefully at the dimensions, several questions were answered. The only weirdness is the number of screw strips. The program seems to be defaulted to 30 per cabinet. I guess I just need to adjust the number to whatever will hold the cabinet up. That being said, I've installed the update and, as a fellow desktop programmer, I appreciated the work you've done as well as the ongoing task of customer service.
Re: Making the boxes
« Reply #4 on: Aug 27th, 2014, 12:46pm »
After I finished tweaking the standards, I ran the cabinet again and noticed that the 1/4 ply back height dimension is 3/4 less than expected. My cab upper is 40 1/2 tall and the back is 39 3/4.
Re: Making the boxes
« Reply #5 on: Aug 27th, 2014, 6:28pm »
The backs normally run from the top of the top to the bottom of the bottom. If you have 3/4" box material and a 1 1/2" bottom rail the size you mentioned would be correct for the default settings.
You can enter .75 in the back height adjustment in the Upper standards or in the Cabinet Parts Adjustment window (same setting but accessible in two locations).
Logged
Please remember this forum is for users to help each other. If you need a faster answer to a question email me directly.
Logged
, I'll have to see about changing that.