Cabinet Planner
General >> Cabinet Planner >> cut list
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1293037264

---

cut list
Post by wcurlin on Dec 22^nd, 2010, 10:01am

This may seem silly, but when making inset doors and there are two doors in one opening, I deduct 3/8" from the total with of the opening and then divide the result by two to get my door with. Example- an opening with of 34 1/2" minus 3/8" equals 34 1/8", divided by two equals 17 1/16", the door withs. Is this possible with cabinet planner?

---

Re: cut list
Post by trulycustom on Dec 22^nd, 2010, 8:48pm

Yeah this is possible. In your "Set Standards" menu click on Door Standards option. It will give you a list of items to change. Set your "Overlay" to 0 (zero) for inset doors and then set your "Gap for Paired Doors" to .375 (decimal equivalent to 3/8".
In the choices for a particular cabinet just make sure your Door Overlay is set to 0.00 (zero) and the number of doors equal to 2, and that will work. I tried it using your example numbers and CabinetPlanner gave me two doors of 17 1/16" wide.
Hope that helps.

---