Cabinet Planner
General >> Cabinet Planner >> Cut-List for Uppers
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1362236088

---

Cut-List for Uppers
Post by GaneshSahadeo on Mar 2^nd, 2013, 07:54am

Why are nailers in my uppers not included in the cut-list

---

Re: Cut-List for Uppers
Post by Rob on Mar 2^nd, 2013, 09:33am

Open the Upper Standards and make sure the "number of screw strips" is greater than 1. This setting is saved along with the cabinet so you will need to delete and recreate the cabinet for the new setting to apply.

While there you can also select solid or sheet goods for them.

---

Re: Cut-List for Uppers
Post by GaneshSahadeo on Mar 7^th, 2013, 09:39am

Thanks Rob.

---