Cabinet Planner
General >> Cabinet Planner >> Set standards
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1314655298
Set standards
Post by Larry on Aug 29th, 2011, 4:01pm
Is there a way to print out the standards pages so I can compare settings 1,2,3, and 4 from a hard copy?
Re: Set standards
Post by Rob on Aug 29th, 2011, 4:49pm
Sorry,no.
You could use a screen capture program to save an image of each one.
Re: Set standards
Post by Pete on Aug 29th, 2011, 8:30pm
Hit the print screen button on a desk top and then open paint and paste. On the laptop I need to hold the fn key and print screen.
Re: Set standards
Post by Doug on Oct 3rd, 2011, 2:20pm
Things to ask about Cabinet Planner
1. What is a Bottom Strip (Y or N) Setup upper cabinets
2. What does “Number of Screw Strips” mean
3. If I am using different height cabinets for the uppers, how do I change the heights of the uppers. For example the cabinet above the fridge is 600 mm deep and 864 mm High as opposed to 300 mm deep and 762 mm High, The cabinet above the Micro wave is 400 mm deep and 444 High.
4. On pull-out Standards what is
a. Side Height Adjustment
b. Side Depth Adjustment
c. Front Height Adjustment
d. Front Depth Adjustment
e. Back Height Adjustment
f. Back Depth Adjustment
g. Bottom Height Adjustment
h. Bottom Depth Adjustment
Re: Set standards
Post by Doug on Oct 3rd, 2011, 2:24pm
I am new to this program, and I have to say that what I see and understand I really like. I have purchased other much more expensive programs, that don't work. I know that once I get my head around the process this will be great.
Is there somewhere in the program where there is a definition for each item in the set-up screens? This would make set-up much easier to do.