Cabinet Planner
« Question about back calculation »
Welcome Guest. Please Login or Register. Mar 30th, 2018, 9:55pm
ATTENTION MEMBERS: Conforums will be closing it doors and discontinuing its service on April 15, 2018. We apologize Conforums does not have any export functions to migrate data. Ad-Free has been deactivated. Outstanding Ad-Free credits will be reimbursed to respective payment methods.
Question about back calculation
« Thread started on: Jun 3rd, 2010, 9:39pm »
Here is my list of backs but the amount of sheets never seems to match up. Rob maybe you can help
Back material
2.57 sheets Back
Back list 1 - 31 1/4 x 66 unit# 6 Back 1 - 31 1/4 x 66 unit# 5 Back 1 - 34 1/4 x 40 unit# 14 Back 1 - 33 1/4 x 40 unit# 13 Back 1 - 49 1/4 x 28 unit# 8 Back 1 - 49 1/4 x 26 3/8 unit# 1 Back 1 - 31 1/4 x 26 3/8 unit# 3 Back 1 - 31 1/4 x 26 3/8 unit# 2 Back 1 - 13 1/4 x 26 3/8 unit# 9 Back 1 - 13 1/4 x 26 3/8 unit# 10 Back
Re: Question about back calculation
« Reply #1 on: Jun 4th, 2010, 08:44am »
From the help file topic "Calculating materials"
"The program will add up the total of each Box material type in the job and give the master list of parts. This is the total that will be used for the job and does not compensate for waste or odd sized parts. Even if it says you will use 4 sheets, you may actually need 5 or 6 sheets if the job has over sized cabinets. This figure is the total square inches divided by 4608 to convert it to 4 x 8 sheets."
----------------
For an accurite number of sheets needed you should run the parts through the panel optimizer. I changed the box material to give square feet/meters but still need to change it for the drawer boxes and backs.
Logged
