Cabinet Planner
« sizing on drawer and door fronts »
Welcome Guest. Please Login or Register. Mar 30th, 2018, 10:12pm
ATTENTION MEMBERS: Conforums will be closing it doors and discontinuing its service on April 15, 2018. We apologize Conforums does not have any export functions to migrate data. Ad-Free has been deactivated. Outstanding Ad-Free credits will be reimbursed to respective payment methods.
sizing on drawer and door fronts
« Thread started on: May 21st, 2010, 6:59pm »
Yes this is my first day here....need a little help. I cannot figure out what information I need to input to correct my drawer and door fronts sizes to reflect correctly in the master printout. I played with the stiles and rails on the base cabinet setup and also adjusted the overlay a few times...but am still not getting the right finished sizes on the program. I am doing frameless euro style cabinets and using 3/4" material with a full overlay hinge. I am inputting a 5" drawer height, yet my finished drawer front is 6 1/4" high ( on the printout). I need them to be 5 7/8". The doors are also taller than they should be. The width is fine, not exactly what we normally do...but will work. Can you tell me what else I should adjust or am I missing something
Re: sizing on drawer and door fronts
« Reply #1 on: May 21st, 2010, 7:54pm »
Hi Sheri, welcome to the forum.
Take a look at the Special Overlay in the Door Standards. With this you can individually adjust the overlay for the top rail, middle rail, bottom rail, stiles and middle stiles.
With a little trial & error you should get the sizes you need. If not, post back for more help.
Logged
Please remember this forum is for users to help each other. If you need a faster answer to a question email me directly.
Re: sizing on drawer and door fronts
« Reply #2 on: May 21st, 2010, 8:18pm »
thanks Rob! I saw that but did not think it applied to what I was doing. It instantly made a difference in the height of the drawer fronts....now need to work on the widths.
Any explanation of why the "special overlay" changed what I set in the standard door settings?
Re: sizing on drawer and door fronts
« Reply #3 on: May 21st, 2010, 9:11pm »
The values entered in the Special Overlay boxes shouldn't effect what is entered in the standard overlay box. Did you by chance change to a different set of standards with the Setting # radio buttons?
Logged
