Cabinet Planner
General >> Cabinet Planner >> Cabinet Planner Program -- Printing Labels
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1267210052
Cabinet Planner Program -- Printing Labels
Post by Charlie S. on Feb 26th, 2010, 11:47am
Rob -- I have a question about the " LABEL SECTION " of the program...... I am trying to print labels that would identfy each cabinet for a particular job. Example =
Cabinet #1 Base - 36" wide X 341/2" high X 24" deep
-or- Cabinet #2 3 Drawer Base 18" wide X 34 1/2" high X 24" deep -or- Cabinet #27 - 2Door Wall Cabinet - 42" wide X 30" high X 12" Deep. etc. etc. etc. You could put these labels on the back of the cabinets as an identification for when they are installed. Am I having a "Brain-Fart" and missing something in the Cabinet Planner program... or is this function not possible. Looking foward to your reply ----- Charlie / CG Cabinets & Woodshop Deland Florida 
Re: Cabinet Planner Program -- Printing Labels
Post by Rob on Feb 26th, 2010, 6:00pm
The label printing is only set up for printing individual parts. I will look into adding labels for the cabinets themselves, it shouldn't be too hard.
Re: Cabinet Planner Program -- Printing Labels
Post by dhg on Feb 26th, 2010, 9:12pm
Rob, as long as the subject is labels, I printed out labels for a job I'm working on and used the 80 count labels and it looks like some info for machining dado's have been added which are being printed into the next label. Did I miss something and are the 80 count labels now out of use?
Re: Cabinet Planner Program -- Printing Labels
Post by edsaws on Feb 26th, 2010, 9:25pm
I had the same prob as dhg with a few of the labels on a recent job.
Re: Cabinet Planner Program -- Printing Labels
Post by Rob on Feb 26th, 2010, 9:44pm
Thanks for letting me know. I will get that fixed in the next update.
Re: Cabinet Planner Program -- Printing Labels
Post by Rob on Mar 3rd, 2010, 3:29pm
Done.
Re: Cabinet Planner Program -- Printing Labels
Post by edsaws on Mar 13th, 2010, 05:43am
Thanks Rob labels look good.
Re: Cabinet Planner Program -- Printing Labels
Post by buzzymcgraw on Apr 25th, 2010, 3:53pm
Rob, I am trying to print 80 count labels using Avery 8167 like the program calls for but the scale of the labels is not right. The first couple of rows are good but as they continue down by mid-page they are off the labels by 1/2 way then continue off from there. Columns are ok but the rows seem to far apart. Any suggestions?
Re: Cabinet Planner Program -- Printing Labels
Post by Rob on Apr 25th, 2010, 6:23pm
Which operating system are you running? Maybe MS changed something with Windows 7 if thats what you have.
The 80 label printing uses Arial 7 for the font. Try opening a Notepad document and then change the font to Arial 7 to see if it is available on your computer. You will need to type in the "7" since the smallest available in the font dialog is 8.
Re: Cabinet Planner Program -- Printing Labels
Post by buzzymcgraw on Apr 26th, 2010, 04:37am
I'm using Vista which I think 7 is based on. Wordpad will let me change the font size to 7 but how can I in CP?
Re: Cabinet Planner Program -- Printing Labels
Post by buzzymcgraw on Apr 26th, 2010, 04:55am
Never mind Rob- I printed from my laptop w/ XP and it worked perfect. Thanks, Jon
Re: Cabinet Planner Program -- Printing Labels
Post by Rob on Apr 26th, 2010, 08:31am
Do you use the same printer on both computers?
Re: Cabinet Planner Program -- Printing Labels
Post by buzzymcgraw on Apr 29th, 2010, 05:02am
No, when I switched to Vista on my desktop I bought new multi function because my old one didn't have Vista support. Kept the old one to use w/ laptop.