Cabinet Planner
General >> Cabinet Planner >> Calculated (front to back) measurement
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1317741125
Calculated (front to back) measurement
Post by Doug on Oct 4th, 2011, 09:12am
I have done a set of cabinets and am reviewing the cut-list and discovered a problem, that I don't know how to fix.
All of the (front to back measurements) are short by my material thickness 16mm.
There has to be something that I have set-up incorrectly.
Can someone help me with this problem?
Re: Calculated (front to back) measurement
Post by Rob on Oct 4th, 2011, 11:15am
If you have your face frame thickness set to zero, the only thing it might be deducting is the back thickness. Try setting a value for the "inset back depth" and then it won't deduct the backs from the sides. You may need to add to the tops & bottom depths with the "box to face frame dado depth" in the General standards.