Cabinet Planner: Drawer Standards

Cabinet Planner
General >> Cabinet Planner >> Drawer Standards
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1328400861

Drawer Standards
Post by edp on Feb 4^th, 2012, 5:14pm

I use a drawer lock router bit for my drawer construction. The available settings do not allow for this style of assembly and so I need to manually change the size of the bottom panel befor I output the cut list. Any chance of adding seperate options for the front/backs and sides to overcome this nuisance?

Re: Drawer Standards
Post by Rob on Feb 5^th, 2012, 08:29am

You should be able to use the "Bottom length adjustment" in the drawer standards to get your bottom the correct size.

Re: Drawer Standards
Post by edp on Feb 6^th, 2012, 4:57pm

Should have expected the answer to be right under my nose as always. I would have known this if I was keeping up with the constant stream of program improvements. I'll bet the string of code you are currently generating makes the original version that I started with look like a nursery rhyme.
Well.........thanks for your help and thanks for a great tool.

Ed