Cabinet Planner
General >> Cabinet Planner >> Custom Tall - Not Saving Material Names
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1334688907

---

Custom Tall - Not Saving Material Names
Post by davejber on Apr 17^th, 2012, 12:55pm

Hey Rob,

1. Dealing with Tall Custom Cabinet, but can't seem to get the box materials to save.
   
   
   
   • I've added three names to the list: 1/2_MDF, 5/8_MDF, and 3/4_MDF to the material list. These names are available in the drop down lists when selecting the sides, top, and bottom materials.
     
   • I click "Continue/OK/Save" reopen the cabinet and the material name reverts to "Plywood"
     
   • Happens in either view (floorplan/elevation)
     
   • Functions correctly in Tall 2 Opening and Tall 3 Oppening cabinets
   
   
2. Also, options to change defalut dimensions for face frame, box material, etc are not available in Tall Custom cabinet like the other tall cabinets. Is this planned or needs to be fixed?

---

Re: Custom Tall - Not Saving Material Names
Post by Rob on Apr 17^th, 2012, 4:52pm

1. Installing the latest update should take care of this. Though the default material same the same (see 2)

2. With the Tall Custom there was'nt enough variables left for be able to change everything like in the other cabinets so these have to use the defaults for a lot of it.

---

Re: Custom Tall - Not Saving Material Names
Post by davejber on Apr 17^th, 2012, 9:37pm

I'm running version 4.01 4/12/2012 - problem still exists. Not urgent.

---

Re: Custom Tall - Not Saving Material Names
Post by Rob on Apr 17^th, 2012, 10:11pm

The only way I'm able to duplicate this is if I switch to a different set of the 4 standards and the material names are different in that set of standards.

Is anyone else having problems with this?

---