Cabinet Planner: raised Panel ends

Cabinet Planner
General >> General Discussion >> raised Panel ends
http://cabplanner.conforums.com/index.cgi?board=Discussion&action=display&num=1448067311

raised Panel ends
Post by n7kon on Nov 20^th, 2015, 5:55pm

I have a cabinet that I want to put a raised panel on. I have it created and it is attached to the cabinet. But it is wider than the standard panel. it should be 15 1/16" wide but comes out 16 1/16" wide. cant find the standards for the panel to see why it is making it an 1" wider.

any help would be great
Thanks Keith

Re: raised Panel ends
Post by Rob on Nov 20^th, 2015, 11:42pm

With raised panel ends the panel will always be given as the size it was created. The program doesn't have a setting that will change it sizes.

Are you saying you created the panel as 15 1/16 but the program is giving it as 16 1/16?

Re: raised Panel ends
Post by n7kon on Nov 23^rd, 2015, 2:22pm

I figured out what i was doing wrong. 2 things, one is I used depth of tong for tong which is 1/4" when I should have been using 3/8" which is depth of stiles and rail cut. the second is I used full depth of cabinet when should have used what the blank side was measured at. Thanks for taking time to get back.
Have a good holiday

Keith

Re: raised Panel ends
Post by Rob on Nov 23^rd, 2015, 8:34pm

Excellent, glad you were able to figure it out.