Welcome Guest. Please Login or Register. Mar 30th, 2018, 9:15pm
ATTENTION MEMBERS: Conforums will be closing it doors and discontinuing its service on April 15, 2018. We apologize Conforums does not have any export functions to migrate data. Ad-Free has been deactivated. Outstanding Ad-Free credits will be reimbursed to respective payment methods.
Cabinet Depth
« Thread started on: Nov 7th, 2010, 05:57am »
Curious.. What inside depth for uppers are most using. 10.5 to 12 Screw strip inside box or on 1/4" back I cut my sides 11 7/8 with screw strip in back so a 11 3/4" plate will fit.
Re: Cabinet Depth
« Reply #1 on: Nov 7th, 2010, 07:12am »
At present I am cutting sides 11" to get to a 12" total box depth. I usually have at least one deeper depth cabinet to allow for deeper dishes. I have been thinking about cutting my sides at 12" though, it would be easier math! My screw strip is on the inside at the top.
Re: Cabinet Depth
« Reply #2 on: Nov 7th, 2010, 2:35pm »
Depends if I am building face frame or euro style cabinets. But I always concerned with 4' x 8' plywood to be able to get the most out of a sheet. That's were the optimizer is great.
Re: Cabinet Depth
« Reply #5 on: Jan 28th, 2011, 9:57pm »
My uppers finish out at 14" deep as my standard. I use a full 3/4" thick back panel to eliminate the need for screw reinforcements. Just predrill, hang and cover the screws with a color matched dot.
Logged
Come on in, the beer is cold and the wood is dry We keep the Red Oak piled 6' high
Logged
