Welcome Guest. Please Login or Register. Mar 30th, 2018, 8:53pm
ATTENTION MEMBERS: Conforums will be closing it doors and discontinuing its service on April 15, 2018. We apologize Conforums does not have any export functions to migrate data. Ad-Free has been deactivated. Outstanding Ad-Free credits will be reimbursed to respective payment methods.
Flat panel doors
« Thread started on: Jan 29th, 2017, 12:43pm »
Not sure if this is the correct location for this question. When creating "type 14" doors It seems the flat panel width should be the same as the door rails Mine are showing 13 15/16 door rails but 12 15/16 wide panel
Re: Flat panel doors
« Reply #1 on: Jan 29th, 2017, 1:36pm »
The default settings should give a 1/8" gap on all 4 sides of the panel.
In the Door standards, check your panel width adjustment. Also check the door tenon length, this is usually left at zero for normal stile & rail cutters.
Re: Flat panel doors
« Reply #2 on: Jan 29th, 2017, 4:16pm »
Ok maybe a bit more explaining I`m making shaker style doors with .5 overlay I cut a 1/4 thick by 3/8 groove in stiles and rails The rails also have a tenon to fit inside that groove.
My door settings show .375 stile and rail cutter depth I have .375 as my tenon length.
I don't have anything set for panel size adjustment
If I set my tenon length at 0 will the rails be long enough?
Logged
