Cabinet Planner
« Finished ends VS unfinished ends »
Welcome Guest. Please Login or Register. Mar 30th, 2018, 9:30pm
ATTENTION MEMBERS: Conforums will be closing it doors and discontinuing its service on April 15, 2018. We apologize Conforums does not have any export functions to migrate data. Ad-Free has been deactivated. Outstanding Ad-Free credits will be reimbursed to respective payment methods.
Finished ends VS unfinished ends
« Thread started on: Nov 16th, 2013, 1:20pm »
Example: 12" deep upper cabinet. 3/4" FF. Side of cabinet with finished end should measure 11 1/4" deep and unfinished side should measure 11" deep. I rabbit my finished end to hide the 1/4" back on finished side. Also will use this method on base cabinets. Not applying a raised panel end.
My question is will the program allow me to do this or will I have to edit my cut list?
Re: Finished ends VS unfinished ends
« Reply #1 on: Nov 16th, 2013, 9:31pm »
If you use type 2 uppers (upper standards) it will adjust the side depth like this. But, with the type 2 uppers it runs the bottom through on un-finished sides and shortens that side so it sit on top of the bottom.
The bases don't have this option.
Logged
Please remember this forum is for users to help each other. If you need a faster answer to a question email me directly.
Re: Finished ends VS unfinished ends
« Reply #3 on: Feb 8th, 2016, 4:53pm »
Rob, The program seems not to take into consideration the 'bottom lip' setting when using 'upper cabinet type 2'.
I like my bottom rail to extend 1/4" above the box bottom. When using scribe on boths sides I get 28.5" sides. I assume that the top of the sides are located at the top of the face frame. Using a 1-1/2" bottom rail I should have 28.75" sides.
Yes, it is easy to change in the 'adjustments', but I would like to understand the logic in the program
« Last Edit: Feb 8th, 2016, 5:07pm by timberlinemd »
Logged
