Welcome Guest. Please Login or Register. Mar 30th, 2018, 8:59pm
ATTENTION MEMBERS: Conforums will be closing it doors and discontinuing its service on April 15, 2018. We apologize Conforums does not have any export functions to migrate data. Ad-Free has been deactivated. Outstanding Ad-Free credits will be reimbursed to respective payment methods.
Upper Corner sides
« Thread started on: Jun 9th, 2016, 02:19am »
I make frameless cabinets with solid 3/8" thick banding to cover the ply edges. To have the program calculate the sizes correctly, I set face frame thickness to .375 in general standards.
I use a cabinet depth of 14" and the program calculates the sides for 13-5/8", allowing me to add the 3/8" banding to arrive at a final 14" depth.
On upper corner cabinets however, when I set the left and right side depths to 14", the cut list shows the sides to be 14" instead of 13-5/8". I'm confused because the cut list also shows 3/8" solid face frame just like all the other normal cabinets. This would bring my final depth to 14-3/8".
Is there a setting I can apply to make the numbers come out right?
Logged
