Cabinet Planner
General >> Cabinet Planner >> cut list
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1293036464

---

cut list
Post by wcurlin on Dec 22^nd, 2010, 09:47am

I usually make inset doors. I am having a problem with generating cut lists. I entered -0.125 for my usual 1/8 inset with but the rail dimention is not right. example: for a door that needs to be 13 3/4" wide by 36 3/4" tall I get a rail lenth of 10 1/4". with 2 1/4" rails and stiles. It needs to be 10". What am I doing wrong?

---

Re: cut list
Post by Rob on Dec 27^th, 2010, 9:30pm

In the Door Standards, try decreasing the "Stile & rail cutter depth" by 1/8". That should take care of it for you.

---

Re: cut list
Post by wcurlin on Dec 29^th, 2010, 10:42am

thanks

---