Cabinet Planner
General >> Cabinet construction >> Dishwasher
http://cabplanner.conforums.com/index.cgi?board=construction&action=display&num=1485735333
Dishwasher
Post by MikeH on Jan 29th, 2017, 5:15pm
Still very new to the program.
How would you use CP to design a dishwasher cabinet?
It would have 2 inch face frame (sides and top)
There would be box sides and a back but no bottom
Toe kick cutouts on both sides (no actual toe kick )
Re: Dishwasher
Post by Rob on Jan 29th, 2017, 6:03pm
Is it going to be a free standing dishwasher with no cabinets on either side? Usually dishwashers don't need a cabinet, just a 24" opening between cabinets. And, their height is 34.5" so the 2" rail above would be a problem.
However, the Fridge Cab should work.
Re: Dishwasher
Post by MikeH on Jan 29th, 2017, 6:37pm
Thanks Rob
The one time I built one I needed the face frame on the sides
Was not free standing by itself
I do remember I needed a smaller top rail
I'll look at the fridge cabinet