Cabinet Planner
General >> Cabinet Planner >> Print - Portrait vs Landscape
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1407648739
Print - Portrait vs Landscape
Post by BrettA on Aug 9th, 2014, 11:32pm

Doing a "print drawing" of a plot plan for a outdoor kitchen BBQ that does not fit when printed in 'Portrait". Needs to be printed in "Landscape". Any advice? Need to get permits this coming Monday. Thanks in advance.
Re: Print - Portrait vs Landscape
Post by Rob on Aug 10th, 2014, 08:23am

http://cabplanner.conforums.com/index.cgi?board=wish&action=display&num=1336581743

I will have to check and see if the new compiler I'm using for the program has this ability.
Re: Print - Portrait vs Landscape
Post by BrettA on Aug 10th, 2014, 09:28am

I tried to pre-set the printer for landscape, but it keeps going back to Portrait when you try to print a new item through CP. Being able to choose, for both the 3D and Print Drawing, to be printed in Portrait or Landscape could be convenient. Thanks Rob.
Re: Print - Portrait vs Landscape
Post by BrettA on Aug 10th, 2014, 12:10pm

BTW - Experimenting on the 3D Landscape printing. Saved as a .jpg in a project file in the computer's documents file. After some sizing adjustments in CP 3D, and a rotation as a .jpg, it prints out the 3D just fine in landscape.
Re: Print - Portrait vs Landscape
Post by Rob on Aug 10th, 2014, 1:16pm

on Aug 10th, 2014, 09:28am, BrettA wrote:
I tried to pre-set the printer for landscape, ...


Did you do this through the program or through your printer's control panel?

Doing it through the "Select Printer" in the program won't do anything, you need to do in the default settings in your printer control panel.