Cabinet Planner
General >> Cabinet construction >> Wood range hood http://cabplanner.conforums.com/index.cgi?board=construction&action=display&num=1317910575 Wood range hood
Post by tagco on Oct 6th, 2011, 08:16am
Looking for some info on designing a wood range hood.
Re: Wood range hood
Post by BrettA on Oct 6th, 2011, 11:58am
Play with it, then check it out on the 3D view. Change it , check it. It's pretty simple to figure out what the different cells control. Good luck.
Re: Wood range hood
Post by Rob on Oct 6th, 2011, 4:36pm
In the image below, the flat area on top is defined with the "top depth" and "top height. The flat area on bottom is the "bottom depth" and "bottom height". The angled section in the middle is what is left over. If you need, the top or bottom height can be set to zero.
Re: Wood range hood
Post by tagco on Oct 7th, 2011, 06:36am
Rob thanks for info ...
Re: Wood range hood
Post by SanCabs on Jan 15th, 2012, 09:56am
Rob, I made a test hood cab and went to print, but it has no drawing or cutlist.
Re: Wood range hood
Post by Rob on Jan 15th, 2012, 12:19pm
Rob, I made a test hood cab and went to print, but it has no drawing or cutlist.
They are for display only.
Help File>Individual cabinets>Uppers>Wood Range hoods: Wood Range Hoods are for display only. Since everyone builds these quite differently, no parts are given. Re: Wood range hood
Post by Pete on Jan 18th, 2012, 7:44pm
Combine a cabinet - valance - shelf - deeper wall fillers - corbels and if Rob ever gets time some onlays ooops
ooops 