Cabinet Planner: evenly spaced between light switches

Cabinet Planner
General >> Tips and tricks >> evenly spaced between light switches
http://cabplanner.conforums.com/index.cgi?board=tips&action=display&num=1258325440

evenly spaced between light switches
Post by sec on Nov 15^th, 2009, 3:50pm

sometimes i need to get tall cabinets evenly spaced between two points (ex. light switches,outlets) i couldn't find these in the program i used a rossette and made them the same size as the switches and placed them properly on the elevation page. this gave me something to look at on the drawing plus the confidence i needed that the cab. was where it was supposed to be.

Re: evenly spaced between light switches
Post by JGCW on Aug 18^th, 2010, 10:19pm

Good trick. I will start using that on future drawings. You could also use that to locate where clients want their electrical boxes and pass on that info. to the electrician. Something that is often miscommunicated and consequently they can be put in the wrong spot.