Cabinet Planner
General >> Cabinet Planner >> Back measurements on cut list
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1311906172

---

Back measurements on cut list
Post by revrandyf on Jul 28^th, 2011, 8:22pm

Sorry to be a pain...I'm still tweaking the standards and looking at the results. When I calculate the cut list for a cabinet, the back is short by the amount the bottom is off the floor. I would like to have the back go all the way to the floor. Is there a way? I've looked through all the standards, the help files and searched the forum. Thanks for any help.

---

Re: Back measurements on cut list
Post by Rob on Jul 28^th, 2011, 8:41pm

You'll need to use the "Back height adjustment"

Since you probably only want this for your bases, open the editing window for the cabinet and press the More button. In the More window set the back height adjustment value to what you want it increased by.

---