Cabinet Planner
General >> Cabinet Planner >> upper corner cabinet
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1303160749

---

upper corner cabinet
Post by wcurlin on Apr 18^th, 2011, 3:05pm

I'm having a problem with laying out an upper corner cabinet. The program won't let me make both sides the same depth. I'm trying to lay out a simple 24 x24 cabinet (back dimentions) where the sides work out 12 x12 on the left and right. What am I doing wrong? Thanks

---

Re: upper corner cabinet
Post by Rob on Apr 19^th, 2011, 08:20am

What sizes do you have entered for the left back, right back, left side and right side?

I have a feeling for have 24 for all of them. The left side depth and right side depth should probably be set to 12.

---

Re: upper corner cabinet
Post by trulycustom on Apr 20^th, 2011, 6:40pm

Make sure you are not using the Angled Upper cabinet choice. You want to use the "Corner" cabinet in the Upper cabinet drop down. If you use the Angled Upper it will give you a message that "Both sides cannot be the same depth". The "Corner" cabinet is a standard upper corner.

---

Re: upper corner cabinet
Post by wcurlin on Apr 22^nd, 2011, 07:52am

duhh! Sometimes I can't even pay attention!! Thanks.

---