Cabinet Planner
General >> Cabinet Planner >> Countertops & Backsplash
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1382884814

---

Countertops & Backsplash
Post by Cabinetman1842 on Oct 27^th, 2013, 08:40am

How do you change standards for countertop "DEPTH" -- "THICKNESS" also Backsplash "HEIGHT"

---

Re: Countertops & Backsplash
Post by Rob on Oct 27^th, 2013, 09:44am

These are all based on your standard base cabinet depth and box material thickness.

The depth is your base cabinet depth plus your box material thickness x 2

The thickness if your box material thickness x 2

The backsplash height is your box material thickness x 4

The backsplash thickness in the 3d is your box material thickness x 1.5

---

Re: Countertops & Backsplash
Post by Rob on Oct 27^th, 2013, 2:14pm

on Oct 27^th, 2013, 10:10am, Cabinetman1842 wrote:

Rob.... Thanks for your reply on Countertops & Backsplash. Let me rephrase my question. How do I set the default Countertop thickness to 1.5". How do I set the default Backsplash height to 4.00 ". How do I set the default Countertop Depth to 25.25" How do I change those default settings for different job requirements .Thanks Cabinetman 1842

Sorry, there aren't settings for these. You'll need to change the sizes as needed for different jobs.


PS, I deleted the other thread since it was a continuation of this discussion.

---