Cabinet Planner
General >> Cabinet Planner >> Drawer Boxes
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1425425209
Drawer Boxes
Post by Scooter on Mar 3rd, 2015, 4:26pm
Is there any future plan to add a menu for just building drawer boxes without cabinets? I like that you can just build doors without cabinets. Many times a customer wants just new drawers. It would be great to have this feature.
Re: Drawer Boxes
Post by Rob on Mar 3rd, 2015, 6:50pm
Would the "pullout" work? It's basically a drawer box with a different name.
Re: Drawer Boxes
Post by Scooter on Mar 3rd, 2015, 7:00pm
Yes it will! Didn't even cross my mine to use the pullout. Thanks Rob!
Re: Drawer Boxes
Post by Rob on Mar 3rd, 2015, 7:51pm
Me either at first. I was trying to figure out a way to do it and them remembered the pullout was already there 
Re: Drawer Boxes
Post by Scooter on Mar 4th, 2015, 4:51pm
Rob the pullout feature works great for just making drawers. The only thing is that you can't specify different materials. I use 1/2 baltic for the boxes and 1/4 birch ply for the bottoms. The drawer feature allows you to specify. This would also allow to do a separate panel optimization for the different materials. This is just FYI. Thanks
Re: Drawer Boxes
Post by tagco on Mar 8th, 2015, 10:10am
You can also use a pencil drawer, just set all of the cabinet box rail and stiles to zero but leave your overlay to what you use. Set width to width of drawer opening and depth to depth of cabinet. I have 3" deducted of drawer depth this gives me a 21" side for a 24" deep cabinet. This way your drawer standards will work.You can then change material specs. 