Cabinet Planner: Fluted boards and columes??

Cabinet Planner
General >> Cabinet Planner >> Fluted boards and columes??
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1265851462

Fluted boards and columes??
Post by NickB on Feb 10^th, 2010, 6:24pm

Rob,
when I use these two Items to build things I will drag them out and input the sizes and places in the window on the right.
When I hit save it leaves them at where ever I clicked on the drawing to drag them out above the floor. I have to reclick on the part and reenter the height and hit save again for it to work right and place it on the floor for instance.
I hope this makes sence....

Thanks,
Nick

Re: Fluted boards and columes??
Post by Rob on Feb 10^th, 2010, 8:00pm

This is the same with anything initially placed with the click & drag. When you change any of the values you need to press the ok button so the program reads the new values and applies them. After pressing the ok button you can then press the save button.

Re: Fluted boards and columes??
Post by NickB on Feb 11^th, 2010, 8:45pm

OK grin

I knew it would be something simple!

Thanks Rob!