Cabinet Planner: Euro Cabinet back height

Cabinet Planner
General >> Cabinet Planner >> Euro Cabinet back height
http://cabplanner.conforums.com/index.cgi?board=general&action=display&num=1418924520

Euro Cabinet back height
Post by WmNelson on Dec 18^th, 2014, 10:42am

I am trying to make some Euro wall cabs that are 36" high. The sides show as 36", but the backs show as 35 7/8". Why is this? Is there some other setting to adjust the backs to the same height as the sides?

Thanks!

Re: Euro Cabinet back height
Post by Rob on Dec 18^th, 2014, 12:00pm

The height of the back on the upper cabinets is figured as the cabinet height – bottom strip width + back height adjustment

What do you have entered for the bottom strip width and for the back height adjustment?

Re: Euro Cabinet back height
Post by WmNelson on Dec 19^th, 2014, 05:49am

I have the Standards for this project set as no bottom strip and 0 height adjustment.

Re: Euro Cabinet back height
Post by Rob on Dec 19^th, 2014, 11:30am

OK, the bottom strip width is figured as the bottom rail width - box material thickness - bottom rail lip.

What do you have your bottom rail lip set to?

Re: Euro Cabinet back height
Post by WmNelson on Dec 19^th, 2014, 1:28pm

I think I figured out the problem. I entered the actual box material thickness of .671 and used .75 for the top and bottom rail thickness.

Thanks!

Re: Euro Cabinet back height
Post by Rob on Dec 19^th, 2014, 1:55pm

Yep, that would do it. User Image

You're doors will be a different height now if you've corrected the rail widths.