Author |
Topic: frameless euro cabs (Read 355 times) |
|
ruthless1
Junior Member
member is offline
Gender: 
Posts: 56
|
 |
frameless euro cabs
« Thread started on: Feb 14th, 2011, 6:01pm » |
|
ok I'm trying to do a couple of things so here they are
first, is there a way to trick the program into making the bottom as deep as the sides ,with the sides being the cabinet height ,but i want to dado the back .25 into the sides and bottom. I can get the backs right just not the cabinet parts,and the screw strips will be behind the back .so the face of the back will be recessed 1", the screw srtips are messed up to
second, I want to build the upper boxes useing french cleat so i need the same as well
I've messed with it long enough to get it to produce a good master list for doors and drawer fronts useing the special overlay boxes
Ron have you ever thought about making a instruction manual for the euro style cabs it would be awesome to be able to print it out and have it in front of me....overlay examples, box parts , etc
and one more thing is that when i put a scribe on the box the way it says to it comes out wrong every time i found it easier to just shrink the box the scribe amount and do it that way
whew ! sorry guys just trying to make the doughnuts 
|
|
 Logged
|
|
|
|
Rob
Administrator
member is offline
Gender:
Posts: 882
|
|
Re: frameless euro cabs
« Reply #1 on: Feb 15th, 2011, 11:11am » |
|
Quote:| first, is there a way to trick the program into making the bottom as deep as the sides |
|
The "box to face frame dado depth" settings can be used to adjust the depths of the sides, top and bottom, even if you don't have face frames.
Quote:the screw srtips are messed up to
|
|
Can you be more specific?
Quote:| one more thing is that when i put a scribe on the box the way it says to it comes out wrong every time |
|
I will have to look at the scribe on frameless cabinets. I thought it was working properly.
|
|
Logged
|
Please remember this forum is for users to help each other. If you need a faster answer to a question email me directly.
|
|
|
ruthless1
Junior Member
member is offline
Gender:
Posts: 56
|
|
Re: frameless euro cabs
« Reply #2 on: Feb 17th, 2011, 1:17pm » |
|
i did try the dado setting but i had no luck , im sure its user error , and the scribes i mentioned are as followed:
set the left stile for .5 more on the cab right?when i do it the doors come out wrong the overlay probably has something to do with it, i use this for the special overlay option
stiles:0.6875
middle stiles:0.3125
top rail:.5
middle rail:0.3125
bottom rail:0.75
works great
|
|
Logged
|
|
|
|
Rob
Administrator
member is offline
Gender:
Posts: 882
|
|
Re: frameless euro cabs
« Reply #3 on: Feb 17th, 2011, 2:38pm » |
|
When you changed the face frame dado depth did you press the "Save and apply to current job" button? Or the "Save as default"?
I haven't yet had a change to check on the frameless scribe. Are you increasing the stile width and settting the scribe to the same amount as you increase the stile width?
|
|
Logged
|
Please remember this forum is for users to help each other. If you need a faster answer to a question email me directly.
|
|
|
ruthless1
Junior Member
member is offline
Gender:
Posts: 56
|
|
Re: frameless euro cabs
« Reply #4 on: Feb 17th, 2011, 11:22pm » |
|
Cabinets saved for; trial and error 2
1 40.00w x 30.50h x 24.00d Base
Box parts for trial and error 2
1 - 24 x 39 unit# 1 Oak_ply Bottom
1 - 24 x 30 1/2 unit# 1 Oak_ply Right_side
1 - 24 x 30 1/2 unit# 1 Oak_ply Left_side
2 - 22 5/8 x 38 3/8 unit# 1 Oak_ply Shelf
2 - 3 x 39 unit# 1 Oak_ply Stretcher
3 - 3 x 38 1/2 unit# 1 Oak_ply Screw_strip
here it is , yes sir i tried to save it a thousand different ways , the back is inset 1" so now i noticed that the shelf depth is wrong too should be 22 7/8 right ?but i cannot get the width to change no way for the strechers and the bottom , what would you type in for the specs i wanted please list them so i can try,i will do it to this cab, sides and bottom all the way back ,back inset 1", back dadoed into bottom and sides 1/4,screw strips behind the back , thanks rob sorry if im a thorn in your side 
|
|
Logged
|
|
|
|
Rob
Administrator
member is offline
Gender:
Posts: 882
|
|
Re: frameless euro cabs
« Reply #5 on: Feb 18th, 2011, 08:09am » |
|
You're not being a thorn in my side but I'm not exactly sure what you're looking for.
Is the parts list you posted what you want the parts to be or is it what the program is giving you? It looks like the bottom depth is the same as the sides. Is that what you want?
Do you have a value entered for the "Inset back depth"? If so, this will decrease the bottom depth by that amount. To correct for this, open the General Standards and enter that amount in the "Bottom" setting for the "Box to face frame dado depth". (I just checked and you can press either of the save buttons and it will be applied)
There isn't a setting to change the length of just the stretchers. The dado depth will effect the length of them but it also changes the length of the tops & bottoms.
|
| « Last Edit: Feb 18th, 2011, 08:10am by Rob » |
Logged
|
Please remember this forum is for users to help each other. If you need a faster answer to a question email me directly.
|
|
|
ruthless1
Junior Member
member is offline
Gender:
Posts: 56
|
|
Re: frameless euro cabs
« Reply #6 on: Feb 18th, 2011, 5:27pm » |
|
i want the bottom to be 24 X 38.5 , no dado on the bottom to the sides , just the 1/4" back into the sides and bottom . The bottom and the strechers need to be the same and yes this is the list CP came up with
|
| « Last Edit: Feb 18th, 2011, 5:29pm by ruthless1 » |
Logged
|
|
|
|
Rob
Administrator
member is offline
Gender:
Posts: 882
|
|
Re: frameless euro cabs
« Reply #7 on: Feb 18th, 2011, 5:48pm » |
|
Ok, what do you have the dado depth set to? It seems like it is at 1/4". That would be why the bottom length is 1/2" too long.
Setting it to zero will give you 38 1/2" bottom and stretchers, for a 40" cabinet with 3/4" material and no scribe.
|
|
Logged
|
Please remember this forum is for users to help each other. If you need a faster answer to a question email me directly.
|
|
|
ruthless1
Junior Member
member is offline
Gender:
Posts: 56
|
|
Re: frameless euro cabs
« Reply #8 on: Feb 19th, 2011, 12:58am » |
|
thank you rob i will try that i thought of that but was concernd it would change something else and i would not find out untill it was too late, im working out the kinks
|
|
Logged
|
|
|
|
|
