+- Cabinet Planner (https://cabinetplanner.com/forum)
+-- Forum: Cabinet Planner Forum (https://cabinetplanner.com/forum/forumdisplay.php?fid=1)
+--- Forum: Cabinet Planner (https://cabinetplanner.com/forum/forumdisplay.php?fid=2)
+--- Thread: MISSING PART (/showthread.php?tid=30)
MISSING PART - TIGER - 05-23-2019
Hi, I made upper cabinet and in the calculation window, selecting cabinet boxes and box material panel layout.
It only give both sides and the top, where is the bottom and would this effect the price of the cabinet.
Thank you
RE: MISSING PART - admin - 05-23-2019
Looks like the bottom would be on the next sheet.
Or, if you have the bottom rail width set to zero the program will not give a bottom for the cabinet (upper 1,2,3&4 opening only)
RE: MISSING PART - TIGER - 05-24-2019
(05-23-2019, 09:09 PM)admin Wrote: Looks like the bottom would be on the next sheet.
Or, if you have the bottom rail width set to zero the program will not give a bottom for the cabinet (upper 1,2,3&4 opening only)
Thank you, the problem was the bottom rail was set at zero