Cabinet Planner
help with angle countertops - Printable Version

+- Cabinet Planner (https://cabinetplanner.com/forum)
+-- Forum: Cabinet Planner Forum (https://cabinetplanner.com/forum/forumdisplay.php?fid=1)
+--- Forum: Cabinet Planner (https://cabinetplanner.com/forum/forumdisplay.php?fid=2)
+--- Thread: help with angle countertops (/showthread.php?tid=34)



help with angle countertops - Wifeofthecarguy - 11-24-2019

This is my first post, so not really sure if I am doing this correctly.  Wondering if anyone can offer some help.  I have a couple of problems with the kitchen I am designing.  In the back corner is a corner oven unit that is set back and I can't figure out how to angle the countertop so it doesn't jut out in front of the oven.

The second area is the island.  It has a 45 degree angle for the center unit and a lower countertop to sit at.  Again, I need to be able to angle it.


Thanks for any help you can offer!
Tiffany


RE: help with angle countertops - ngrepke - 01-29-2021

Rob may be able to correct me, but I have never been able to create an angled counter. I suppose you could do it with some extra walls, but that would be annoying Smile
I just alert the customer to the situation and say I can't do that custom detail in the software, but I can in real life Smile