+- Cabinet Planner (https://cabinetplanner.com/forum)
+-- Forum: Cabinet Planner Forum (https://cabinetplanner.com/forum/forumdisplay.php?fid=1)
+--- Forum: Cabinet Planner (https://cabinetplanner.com/forum/forumdisplay.php?fid=2)
+--- Thread: Removing knobs and pulls on Tall Custom (/showthread.php?tid=4)
Removing knobs and pulls on Tall Custom - Mike_d_s - 05-21-2018
Laying out a tall custom for a customer and I'm trying to remove the door and drawer hardware. For a normal tall cabinet there is a door hardware button, but I don't see it for the tall custom.
There are 'More' and 'Openings' buttons to configure the materials and door/drawer types for the custom, but I can't see the way to remove the knobs and pulls. I attached a screen shot of the menu for the Tall Custom.
Am I doing something wrong or somehow missing the button?
Thanks,
Mike
RE: Removing knobs and pulls on Tall Custom - admin - 05-21-2018
In the General Standards, erase what you have for the hardware for the doors (and drawers also if needed). This is the setting the Tall Custom uses.
[attachment=6]
RE: Removing knobs and pulls on Tall Custom - Mike_d_s - 05-21-2018
OK, That did it.
As I side note, I did have to go into the cabinet and save it to force the re-render in the elevation view. But I'm sure it would have worked the same had I changed views.
Thanks for the prompt response.
Mike