+- Cabinet Planner (https://cabinetplanner.com/forum)
+-- Forum: Cabinet Planner Forum (https://cabinetplanner.com/forum/forumdisplay.php?fid=1)
+--- Forum: Cabinet Planner (https://cabinetplanner.com/forum/forumdisplay.php?fid=2)
+--- Thread: Help with doors (/showthread.php?tid=40)
Help with doors - MartinS - 03-26-2020
Hi,
First set of cupboards using all the door features (boxes are fine). Frameless cabinets per instructions in the help files.
Running a test base unit 24w x 23.25 deep by 30h and door sizes are 12-1/16 wide which doesn't make sense. My overlay is 0.5625 (which leaves me 1/16 on each side). What am I missing, as my doors should be 11-7/8 wide.
Marty
RE: Help with doors - Jerry C - 05-14-2020
Assuming your sides are 3/4 thick and you want a 1/16 reveal with a 16th between doors the overlay would be .6875 (11/16) leaving roughly 11 7/8 doors