+- Cabinet Planner (https://cabinetplanner.com/forum)
+-- Forum: Cabinet Planner Forum (https://cabinetplanner.com/forum/forumdisplay.php?fid=1)
+--- Forum: Cabinet Planner (https://cabinetplanner.com/forum/forumdisplay.php?fid=2)
+--- Thread: Door Rails (/showthread.php?tid=57)
Door Rails - Joey - 06-20-2023
Hello
- I am new to program and was wondering why my door rails seem to be 3/4 inch longer than what they should be. I mostly use 2.375 stiles and rails with a .375 depth and tenon length. I have added these dimensions to the standards and yet the rail lengths do not match manual calculations. Any suggestions are welcome!!!!!
ThanksJoey B
RE: Door Rails - admin - 06-20-2023
(06-20-2023, 03:08 PM)Joey Wrote: Hello
- I am new to program and was wondering why my door rails seem to be 3/4 inch longer than what they should be. I mostly use 2.375 stiles and rails with a .375 depth and tenon length. I have added these dimensions to the standards and yet the rail lengths do not match manual calculations. Any suggestions are welcome!!!!!
ThanksJoey B
Set the "tenon length" to zero...
RE: Door Rails - Joey - 06-20-2023
(06-20-2023, 03:44 PM)admin Wrote:(06-20-2023, 03:08 PM)Joey: Thanks that did it!!! Wrote: Hello
- I am new to program and was wondering why my door rails seem to be 3/4 inch longer than what they should be. I mostly use 2.375 stiles and rails with a .375 depth and tenon length. I have added these dimensions to the standards and yet the rail lengths do not match manual calculations. Any suggestions are welcome!!!!!
ThanksJoey B
Set the "tenon length" to zero...