+- Cabinet Planner (https://cabinetplanner.com/forum)
+-- Forum: Cabinet Planner Forum (https://cabinetplanner.com/forum/forumdisplay.php?fid=1)
+--- Forum: Cabinet Planner (https://cabinetplanner.com/forum/forumdisplay.php?fid=2)
+--- Thread: How to eliminate a top from a base unit (/showthread.php?tid=58)
How to eliminate a top from a base unit - Joey - 06-20-2023
Hi to all again:
I am in the habit of using stretchers on my base units and not solid tops how do i eliminate the solid tops and get the stretchers to show on the 3 d and when calculating material how do i get the sizes to show on the materials list? I seem to be doing things differently I guess! I have never had a base unit fail though. thanks in advance for the help I am really trying to make this program work for me.
Joey b in Maine
RE: How to eliminate a top from a base unit - admin - 06-20-2023
The default setting is for stretchers so you must have set it for full tops...
In the Base Standards put an "n" in the box labeled "full tops"
It will not show the stretchers in the 3D, no need to...