+- Cabinet Planner (https://cabinetplanner.com/forum)
+-- Forum: Cabinet Planner Forum (https://cabinetplanner.com/forum/forumdisplay.php?fid=1)
+--- Forum: Cabinet Planner (https://cabinetplanner.com/forum/forumdisplay.php?fid=2)
+--- Thread: Box Parts materials List not listing my bottom material (/showthread.php?tid=60)
Box Parts materials List not listing my bottom material - Joey - 08-28-2023
Good Morning,
Need help, I have tried everything, but I cannot seem to get my material list to reflect the bottoms of my pullouts. When I do CALC and check off the drawer master list it gives me all my parts, but it will not sum up how many sheets of bottom material I need, nor will it reflect it in my panel optimizer. I use Baltic Birch 1/2 inch for sides back and front and my bottoms are 1/4 Baltic Birch the panel optimizer will cut out the bottoms on the 1/2 inch with no picture for the 1/4 inch sheet. What do I need to do to fix this?
Thanks,
Joey