05-07-2026, 10:44 PM
(05-07-2026, 10:41 PM)admin Wrote: "I typically build my face frame 24" wide which extends 1/4 beyond the cabinet on both sides."
Use the scribe settings to get the face frame to extend beyond the side of the box. This shortens the box width by the total entered for the left & right. If you always do this you can set the scribe defaults in the general standards.
If the dado depth was not set to zero in the standards when you created the cabinet, the cabinet still carries the non zero value. open the editing window for the cabinet and press the MORE button. you can change that cabinet's dado depth there.
Excellent, Thank you!