Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help with doors
#1
Hi, 

First set of cupboards using all the door features (boxes are fine).  Frameless cabinets per instructions in the help files.  

Running a test base unit 24w x 23.25 deep by 30h and door sizes are 12-1/16 wide which doesn't make sense. My overlay is 0.5625 (which leaves me 1/16 on each side).  What am I missing, as my doors should be 11-7/8 wide.  

Marty
Reply
#2
Assuming your sides are 3/4 thick and you want a 1/16 reveal with a 16th between doors the overlay would be .6875 (11/16) leaving roughly 11 7/8 doors
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)