Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Door Rails
#1
Hello 

  1. I am new to program and was wondering why my door rails seem to be 3/4 inch longer than what they should be. I mostly use 2.375 stiles and rails with a .375 depth and tenon length. I have added these dimensions to the standards and yet the rail lengths do not match manual calculations. Any suggestions are welcome!!!!!
    ThanksJoey B
Reply
#2
(06-20-2023, 03:08 PM)Joey Wrote: Hello 

  1. I am new to program and was wondering why my door rails seem to be 3/4 inch longer than what they should be. I mostly use 2.375 stiles and rails with a .375 depth and tenon length. I have added these dimensions to the standards and yet the rail lengths do not match manual calculations. Any suggestions are welcome!!!!!
    ThanksJoey B

Set the "tenon length" to zero...
Reply
#3
(06-20-2023, 03:44 PM)admin Wrote:
(06-20-2023, 03:08 PM)Joey: Thanks that did it!!! Wrote: Hello 

  1. I am new to program and was wondering why my door rails seem to be 3/4 inch longer than what they should be. I mostly use 2.375 stiles and rails with a .375 depth and tenon length. I have added these dimensions to the standards and yet the rail lengths do not match manual calculations. Any suggestions are welcome!!!!!
    ThanksJoey B

Set the "tenon length" to zero...
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)